Aboriginal Land Claims in Canada

Aboriginal land claims is the proposition contained in formal statements that are submitted to the provincial and/ or federal government by Aboriginal community claiming that the Crown has not honored its obligations or commitment in respect to treaty or Aboriginal rights as pertains land ownership and usage.Aboriginal land claims are Aboriginal (or Native) people’s claims about their land ownership rights which they inhabited before settlers, primarily Europeans arrived. It is a process that has been active for several decades in countries such as Canada, Australia and New Zealand.This dispute has been in existence due to the native populations’ displacement from their historical land or territory by the European settlers’ arrival.[1]The federal government is particularly involved in most Aboriginal land claims as the primary jurisdiction organ in this matter. The provinces are specifically involved in the sense that their involvement basically rests in ascertai ning historical occurrences that gave rise to such claims. Most of these claims require such assertion on private property, natural resources and Crown lands.The original treaties are therefore considered to evaluate the extent they have been honored or dishonored and the necessary redress in case of dishonor of the same.There is marked difficulty in defining aboriginal rights due to the diversity of the aboriginal cultures but most commonly, these aboriginal rights are defined as collective, inherent rights flowing from their traditional land occupation which is now the present Canada and other orders which are basically social pre-contacts.To many, this implies independence rights through culture, land, resources, governance and other aspects in respect to their self-determination.[2] This is as the Inuit, Mà ©tis and Indian peoples of Canada assert their rights. In this respect therefore, the nation, environment and race context must be put into consideration in dealing with thi s controversial issue that have raised much conflict and debate for several years.The 7th October, 1763 Royal Proclamation had been organized such that the North American’s new acquisitions by the Britain’s governments would not interfere with the Indian’s land interests, particularly in the Ohio Valley.It was also supposed to end the Great Abuses and Frauds. The major reason that led to this declaration was the fact that this area which was referred to as â€Å"Indian Territory† was reserved by the Royal Proclamation since it had not been ceded to or purchased by the British governments. It was thus reserved to them for their hunting endeavors and these Indians were not to be disturbed or molested even though they remained under Britain's protection.Much of the 20th Century Northern Canada’s development and settlement process has been subjected to these land claims which have been comprehensive for past thirty years, and as a result have undergone some significant transformational changes.This is as the aboriginal people have engaged themselves in the encroachment process concerning their customary livelihood restrictions as well as the transformation of their traditional territories.This involved; sedentarization and population relocation, governmental restrictions on fishing and hunting, river systems contamination, diversion, alterations, impoundment and pollution.[3] In the 1970s, Aboriginal legal and political action stimulated formal process establishments that were aimed at Aboriginal land claims resolution and revision of the treaty rights as well as the Aboriginal judicial interpretation.This is particularly seen in the geographers’ documentation of the claims. Furthermore, these documentations overtly expounds these remedies’ effectiveness as concerns the Canadian perspective changes towards the northern Aborigines, development and environment, and how the northern Canada resource regimes have been al tered by these land claims. There is therefore need for cultural understanding and personal awareness development that will foster positive attitudinal reflections on indigenous people’s contribution to overall Canadian development. [1] Charlesworth Max, 1984. The Aboriginal Land Rights Movement. New York: Hodja Educational Resources, pp.45 [2] Brock Peggy, 2001. Words and Silences: Aboriginal Women, Politics and Land. New York: Allen & Unwin, pp.32 [3] Crane John, 1994. Directions for Social Welfare in Canada: The Public’s Review. University of British Columbia Press, pp.12

Max

The film, Max, was directed by Menno Meyjes and those who stared included John Cusack (Max Rothman) and Noah Taylor (Adolf Hitler) among others. The major theme in the movie is the aftermath of the First World War where by, after the collapse of the Kaiser Imperial Reich, the Germans entered in to the newly created Weimer Republic and were faced with the problems of unemployment, poverty and great difference between the haves and have-nots. The essence of the essay is to discuss the major theme, how it’s presented in the film and the reasons for the historical/ cultures values presented in them film. After the First World War, though the Germans are defeated they remained defiant after the war and are being humiliated by the unjust treaties. . The writer/ director expose the anger and a rabid young man whose prejudice and passion led to death of millions of Jews. Max, a Jewish that was initially a painter and lost his arm in the war then became an art dealer in Munich streets where eventually he meets Hitler, a war veteran, who is penniless and further confused between joining the politics and or the artistic desires, they become close friends since their future had been shattered by the war. Max tries to guide Hitler in to successful artistic business, on the other hand, Hitler has another Mentor, Captain Myer, who acknowledges that Hitler has another potential in the politics. There is a struggle between the two mentors and eventually Myer wins and directs Hitler in to politics. The discussions between Max and Hitler clearly show how connected were the politics and art in Germany at that particular time, they further display how the art could the future Germany for better. One of the historical event presented in the movies though the major theme is the trearty of Versailles. After the war, the treaty of Versailles is a major concern to many Germans; Myer therefore formed a class which he used to teach propaganda against the Jews. Max tries to divert Hitler’s anger in to art but he does have the idea of how deep is Hitler’s anger, Max further tells Hitler that if could â€Å"pent up the stuff† within him on the canvas, them many possibilities would unfold Innocent Max at one point of moment tells his children about the Jewish world turning upside down in a couple of decades and after an Anti Semitic presentation which angers Hitler and eventually scribbles on his hand that â€Å"politics + arts = power†, where by the people will be the canvas and the politics will be his art.   All these are used to support the major them of the film. This film teaches the evolution of a culture that resulted to horrors of the Nazi leading to the cold war. There are some flaws in the film where by it concentrates too much on Max’s life’ despite good performances by actors like Cusack. Though good, the cinematography and direction does not also display Germany as it would have been   after the First world war but Germany is displayed like it is in the 20th century therefore the discussions between Max and Hitler aren’t in a historical context. Irrespective of the strong connection between politic and art, the idea of Hitler beginning from the road as an art dealer to the man we acknowledge as Hitler is a bit naà ¯ve and too simple and further tries to humanize Hitler despite never excusing his actions occasionally. Hitler though maintained a moustache after the war is presented being clean shaved in the film. Max is a fiction story of one early man who was very evil and the circumstances that led to his evil behavior; it further explains why the German nationalism after the WW1 resulted to genocide and violence. REFRENCE Max (2002/I), retrieved on 20th, October, 2007, available at www.imdb.com/title/tt0290210/

Horatio Alger’s “Ragged Dick” Essay

In the story of â€Å"Ragged Dick†, Horatio Alger tells an inspirational story portraying a hero, Dick, to be the embodiment of individual opportunity in American culture. Dick gains mobility up the socio ­economic ladder through his good virtue and dedication to higher education. Dick is an honest young â€Å"black ­boot† with a second ­rate shared apartment and low vernacular. However, Dick is generous and industrious, while keeping a frugal stance as to know the value of a dollar. while en route of finding new work, a young boy falls into the east river, and the father swears great rewards to the rescuer. Dick, an excellent swimmer, dives off a ferry and saves the boy, without hearing of any reward. The father, a wealthy industrialist himself, rewards Dick by giving him a well ­paying job as a clerk at his office. Dick, now realizing his potential, has allowed himself a new name with his new career, signifying his upward climb on the ladder claiming that he i s finally, â€Å"cut off from the old vagabond life which he hoped never to resume† and sealing his grip upon the American Dream. Alger’s â€Å"rags to riches† story contains valuable tools that can be used to motivate a person’s social psychology, it’s myths can be unrealistic which can lead a person to believe a dream that could be impossible to obtain. The example of valor, hard work, and initiative are concrete tools for one’s toolbox, whereas relying only on gallantry can only go so far in our socio ­economic world. First, you could just take a look into the professions throughout our economy. Art, literature, and education are thrown on the back burner as business degrees are the #1 funded, and sought after, sectors.

SCHOOL FINANCE BUDGET REDUCTION PLAN AND JUSTIFICATION Essay

SCHOOL FINANCE BUDGET REDUCTION PLAN AND JUSTIFICATION - Essay Example It is the duty of the principal to go back to their respective campuses and then collaborate with their school leadership teams in order to develop a comprehensive plan regarding how to accomplish such budgetary reductions from their existing operating budget. The objective of the study is to plan the budget cut from given information and justify the items chosen to remove or reduce from the school budget in order to meet the district requirements. Budget Reduction Plan The most challenging task of budget cut is to determine the primary sources of revenues and expenditure and then to allocate scarce resources according to requirements. It is general that in a high school, the majority of school budget is allocated towards the benefits and compensations of their staff. In such a scenario it is very important to keep in mind that any significant reduction in the compensation of core teachers and most important staff might lead to de-motivation of staffs and unrest in the campuses. In order to avoid such disputes, the rest of the budget allocations have to be re-planned and prioritized in such a manner so as to help the districts meet goals and standards of the students’ academic performance (Williamson, 2011, pp.1-5). The annual budget is a statement of expenditures and revenues that are likely in a high school during the fiscal. It has to be determined at a prior stage whether the school would have enough funds to pay for the necessary activities by ensuring optimum resource allocation matching school priorities. The budget has to be realistic in the sense that all items of reduction have to be justified to respective departments when cuts will be introduced. All minute details must be highlighted such as any probable error in estimating teaching staff requirements in case any staff leaves the school. Also, it must be ensured that all regulatory and statutory requirements have been complied with. A realistic school budget will ensure financial stability by lowering financial crisis risk during the year; educational excellence by hiring the best teachers available at attractive packages; and reputation and image of school reflected from the relationship between the authority, pupils, and staffs. T he first stage of budget reduction plan is to identify the primary sources of revenues and expenditures (Hechinger Institute, 2011, pp.1-9). Identification of Primary Sources of Revenues The expenditures of a high school are generally divided into three categories namely, salaries and employee benefits, materials and supplies and capital expenditures. In addition, the states also collect expenditure data of school by transportation, operations, debt service and maintenance. It is important to note that the schools hire instructional staffs, custodians, and cafeteria workers in addition to licensed staff members such as administration and teaching staffs, librarian, counselors, etc. Thus, the biggest expenditures in a school are consumed by the personnel. During the 1950s, the teachers’ constituted almost 74% of total school staff and the numbers have been reducing since then as the percentage of instructional staff has been increasing. In the 20th century the percentage of te achers dropped by almost 33% and they have been replaced by instructional aides. The teachers’ salaries are compensated by most districts under single salary schedule where teachers are compensated on the basis of their educational level and total years of experience in teaching profession (Serwach

Leadership Case Study Example | Topics and Well Written Essays - 1250 words

Leadership - Case Study Example One quality of Sheryl that particularly makes her a charismatic leader is that she has been able to make it to the top without losing her femininity. She is glamorous, stylish, and delicate just like a woman is expected to be and yet she is so successful at work. As a successful professional and a qualified and confident person, many women look up to Sheryl as an example. Sheryl is also an example for many women because she is married and has children unlike so many professional women (Zeitlin, 2013). Women fancy being like her; Sheryl has what it takes to make the followers obey without any inconvenience or discomfort. In particular, she is a charismatic leader for the female workers. However, since Sheryl is a strong woman, some men from all positions including the seniors, peers, and subordinates might feel it difficult to accept her in the position she is, particularly because they are used to dominating women more than listening to them. Nevertheless, Sheryl is too emotionally i ntelligent to be controlled by such men in her profession. She knows the skill of gaining others’ consent since she supports her claims with facts, reasons, and statistics. There is no doubt that Sheryl is a very knowledgeable and intelligent person that makes it easier for her to win arguments, if need be. Sheryl is a leader that believes in equality of genders in spite of their differences. Being a woman and a successful leader, Sheryl has set an example for many working women who need motivation and inspiration to step up the ladder. Generally, a perception prevails among the women that deters them from taking challenging roles in their professions. A major reason for the formation of such a perception is that the concept of working women is not entirely consistent with the expectations of the society from the women. Many women feel guilty for not being able to fulfill their domestic responsibilities toward their families because of their work-related responsibilities. And the results are apparent; â€Å"The number of women age 20 and older not in the labor pool, according to the Bureau of Labor Statistics, has soared from 40 million in 2000 to nearly 49 million today; another 315,000 called it quits last month† (Peek, 2013). Sheryl considers women responsible for having lesser representation in the top positions of organizations as compared to men. According to her, women themselves make choices in which they tend to compromise upon their career in an attempt to come up to the societal expectations. While Sheryl does not criticize women for keeping work as a second priority and establishing their domestic responsibilities as their first priority, she does encourage women to try to make informed decisions in their lives by thoroughly reviewing all facts. This problem can partly be attributed to the fact that women and men have traditionally been restricted to domestic and professional lives respectively. The contemporary lifestyle imparts the need for the women to work parallel to men in all spheres of work. Correspondingly, if men share women’s domestic responsibilities, this practice would help create the balance that is much needed. Leaders like Sheryl idealize a world in which women assume the same responsibility as men in leadership and men have a more equal role to play in the domestic sphere as women. For women to play their role in

Race and Intersectionality Essay Example | Topics and Well Written Essays - 1000 words

Race and Intersectionality - Essay Example The paper tells that according to Eliot, intersectionality is the study of the intersections between various disenfranchised minority groups. To be specific, it is the study of the multiple systems’ interactions of discrimination and oppression. It is a study methodology of relationships among many modalities and dimensions of subject formations and social relationships. Racism is an issue of actions, practices, and views that are not only desirable based on gender because they contribute to a sense of superiority and inferiority. It reflects the humanity belief segmented in groups with women experiencing the highest effect of racism than men. Eliot points out that intersectionality tries to look into how and suggests different categories of culture, social and biology interact on many simultaneous levels thus contributing to socially unequal systems. Furthermore, Smith explains that intersectionality is of the stand that traditional conceptualization of acts of oppression in the whole society such as sexism, religion, and racism do not function independently, however, these oppression forms interrelate creating oppression systems that portray the multiple forms intersection of discrimination. â€Å"Racism is not an effect but a tactic in the internal fission of society into binary opposition, a means of creating‘biologized’ internal enemies, against whom society must defend itself†. ... Moreover, another example â€Å"when my son was born I had been deadened with a needle in my spine. He was shown to me-the incredible miracle nothing prepared me for-then taken from me in the name of medical progress†. From the examples, intellectuality is being portrayed in the hospital set up. Stripping away a baby is like stripping a mother all her motherly rights. This portrays how gender is being reflected in the intersectionalism. According to Smith, as individuals seek to create a socially fulfilling and just everyday life and as a colle ction seeking to make history through social movements and political actions, we struggle with unstable connections between class, gender, and race. The explanatory and methodological framework for connecting all these three different axes difference and identity, of antagonism and alliance remains elusive. Harjo observes that any comparative history suggests that solidarity demand across class; race and lines of gender are most likely to compete than to coalesce. According to Eliot, social inequality different intersections are called matrix of domination. This can also be referred to as vectors of privileged and oppression. This term explains how differences in people like class, sexual orientation, age, race among others act as measures of oppression towards the women and finally change experiences in society as living like a woman. Smith explains how women for many years have been raped in wars, the immigrants and the blacks to show them their inferiority or for the men to stamp their authority. For many years the societies have had thinking that influence and fuels oppression and intensify these differences further.

Why I am not a Vegan Personal Statement Example | Topics and Well Written Essays - 750 words

Why I am not a Vegan - Personal Statement Example Discussion and facts backed up by authentic research which are presented in this paper are basically meant to illuminate the reality of the claim that we humans are naturally meant to eat meat not only because our digestive systems are well suited to break down animal protein, but also because meat bags higher position on the scale of food value than plant sources. I am proud on not to be a vegan because meat fulfils my daily energy requirements better than plant foods ever can do. I find people around me, who happen to be rigid vegetarians, munching different types of snacks all day long because their energy requirements do not get fulfilled by relying on plant sources alone like tofu, soybeans, etc. and their vigor markedly recedes consequentially. In order to meet with the amount of calories required to be consumed by a person per day, vegetarians have to cook and eat some portion out of every item from a variety of plant foods at one time while people who do not hesitate in indul ging with meat consumption do not have to go through any such trouble. One meat item is more than often found equivalent to a variety of plant foods, therefore though vegetarians may claim that relying less on meat sources can save humans from many cardiovascular disease, this also remain an open reality that saying goodbye to meat means a great decline in human energy level which gets distorted as a result of consuming vegetables low in food value. People should consume meat fearlessly because even if certain diseases are found to be linked with certain cardiovascular diseases like high blood pressure and heart attacks, this issue can be ruled out easily by reducing the amount of meat consumed on daily basis, rather than quitting meat altogether and following fake vegetarian concepts like eating a meat burger can be anything close to an unethical act. One credible defending point which can be used by meat lovers against vegetarians is that plants would be extinguished today if all humans become vegetarians which would leave no food for cattle as well. â€Å"If we only consumed plants, all the farmland now used to raise livestock would have to be used to raise edible plants, which could mean no livestock† (Hayward). I am also not a vegan because eating vegetables alone can never provide me with the kind of stamina and power which is required to fight various infection and diseases by a normal human being. Research identifies that eating meat not only maintains the balance of sound body health, but it also helps one in combating against several infections by providing enough strength to a person. It also remains a reality that though many efforts are made by vegetarians to advance their cause of saving animals and relying on vegetables, meat forms a fuller source of food for humans than vegetables or other plant sources do. Meat does not happen to be a source of high quality protein alone but research shows that it does much more to enhance human health because â€Å"its loaded with other healthful goodies, including high levels of: iron; B vitamins like niacin and riboflavin that provide healthy skin and nerves as well as help digestion† (Opposing Views, Inc.). Slacking around with minimal energy but showing off by maintaining a slim body status does not seem to form a very excitable idea for me to cut down on meat and go for plant foods,

Summerise Essay Example | Topics and Well Written Essays - 250 words

Summerise - Essay Example The main propagator of this flow also demand some balance of skills by individuals using the web as well as the intensity and the presence of the technology that individuals use. The paper has also been able to examine motivation behind the use of interactive media. Some of the motivations that have been identified to include; approaches that the users of the web have as well as the amount of the usage. The discussion reveals the properties that are seen to fundamentally determine the motivation, where they have been categorized as either intrinsic or extrinsic It is important that before companies decide to use these networks in their businesses and to ensure that the flow is not interrupted, the companies need to set clear objective for the sites. These objectives should mirror the intensions and desires that the consumers harbor for the use of the site. Use of marketing in the interactive media is influenced by the ease of the use of that media. It is this aspect of the media that usually influence the decision of such

Learning about disability culture Essay Example | Topics and Well Written Essays - 500 words

Learning about disability culture - Essay Example This I found to be consisted with mainstream culture in society, which holds that people change and develop as they go through their lifespan. I have also learnt that disabilities take various forms and that how one disabled person may behave is not the same as how others may behave. In addition, it was interesting to note that some people with disabilities find the term to be discriminatory, and a hindrance, especially as some feel that they go through the same issues as able-bodied people and achieve similar results (Stone, 2009). Probably the most important information gathered during the learning activities was that individuals cannot outgrow their disabilities. While this ultimately makes sense, my time volunteering to work with disabled children has made me not question what they will become when they grow up. I agree with the contention that those with disabilities, especially learning disabilities, normally have ability or abilities that can outshine their disabilities (Stone, 2009). Whether because of natural gifts or as devices for compensation and adaptation, these other abilities are dependent on the disabled persons. I enjoyed a video that we watched during one of the classes, in which a man working with a group of community leaders told them about what life and school is like for children who are disabled was an informative activity. One of his illustrations actually struck me when he contended that expecting something from those with disabilities who are not capable of accomplishing the set task is commonplace in society and in school, which I agreed with. In addition, this problem has been found to lie with societal ignorance, rather than with individuals suffering from a disability (Stone, 2009). There is a need for society to be concerned and educated about working with disabled people. People with disabilities also have to overcome issues

Critique of the Ramayana Modern Prose Translation Essay Example for Free

Critique of the Ramayana Modern Prose Translation Essay In a just world, Mr. R. K. Narayan’s estate would be responsible for reimbursing seventeen-fifty, plus applicable taxes, to all those who purchased the Penguin Classics 2006 publication of his book, The Ramayana: A Shortened Modern Prose Version of the Indian Epic. Stated clearly on the back of the cover is the promise that R. K. Narayan â€Å"recounts [The Ramayana] with the narrative flair of a master novelist’’. The back cover lied. Narayan’s re-telling condenses the epic poem so much to the point of nearly listing a series of events. No matter the inspiration, Narayan’s The Ramayana is still a story, and should therefore be able to stand on it’s own as a captivating tale—with further literary research or expansion being used to enhance it’s appeal, not explain it. Arguably, the ‘narrative flair’ of this re-telling is little more expressive than unsolicited summaries found on the Internet, and without further literary aide or instruction, does not stand as a solid piece of literature. What is worse, is that instead of allowing a greater breadth of readers to relate and experience tale of the Ramayana, new readers are alienated by it’s convoluted atmosphere. While the task is grand, Narayan’s translation is not listed as an aide to a larger, more in-depth version; it is still a novel and as such needs to be able to stand strong in its own right when evaluated alone. People who have no prior knowledge of the original Sanskrit story, and who have not been raised with the Hindu epic as a part of their life, should be able to pick up this book, read it, and—regardless of how far the tale may go in global history—be able to enjoy one hundred and fifty one pages of literature, without having any prior knowledge, or requiring further research. Having more knowledge, and doing more research on the original epic tale should increase what readers are able to receive from the book, but it should not be necessary in order to understand it. As it stands, without knowing the original tale, new readers are left with very little literary flow and a patchy depiction of what is supposed to be a lush world. At one point, while Bharatha and Rama argue as to who should be the rightful king, their entire episode is related with: â€Å" The argument went on at a highly academic and philosophical level, the entire assembly watching with respect. (Narayan 60) That assertion does not express a deep academic and philosophical argument, but rather states that one was occurring; the reader doesn’t get to experience what transpired between the brothers, or garner any emotion from it. It goes on to almost quite literally depict the event with a he-said/he-said monotony: So be it; if I have the authority—then I confer it on you as the ruler,† said Bharatha at one stage. â€Å"On my command as the ruler, if you desire to think so, you shall be the King. † It went on thus. Rama went on repeating that there could be no word higher than that of a father; no conduct other than obedience to it. Throughout he referred to Kaikeyi in the gentlest terms and always as â€Å"mother†. (Narayan 61) The listed manner in which the plot is unfolded by Narayan’s re-telling is barely more narrative as a piece of literature than an excerpt from that of the free online encyclopedia Wikipedia: Bharatha refuses to profit from his mothers wicked scheming and visits Rama in the forest. He requests Rama to return and rule. But Rama, determined to carry out his fathers orders to the letter, refuses to return before the period of exile. However, Bharatha carries Ramas sandals, and keeps them on the throne, while he rules as Ramas regent. (Wikipedia Contributors) There is very little more efficiency or flair in Narayan’s telling, and in fact, Wikipedia depicts the stages of the long tale with better clarity; if the prose is not going to be linguistically lush and evocative, it may as well be clear (Wikipedia is not only clear, but free of charge as well). It is of course not a simple task to undertake translating an epic poem from a rhythmic language, into prose with a language devoid of the same musicality. However, to the novice reader of The Ramayana, they would not know the difficulty of the task, and thus—however harsh it may seem— should not be a factor in the reviewing of the story as it stands alone. Narayan was by no means an incapable writer, and as winner of numerous awards and accolades—not the least of which being multiple nominations for the Nobel Prize in Literature (Rajnish Wattas), he does not need defending that he has great ability as a writer, yet the bottom line remain that when it is stripped of further discussion, research, and introductions, The Ramayana: A Shortened Modern Prose Version of the Indian Epic just does not stand on it’s own as captivating modern prose. With nearly each new episode of the tale, Narayan prefaces the action with even more listed information, take for example the introduction to the chapter of Vali: The characters in the drama that follows are Vali, Sugreeva, Hanuman, and Rama. The action takes place in the mountainous forest regions of Kiskinda, a kingdom ruled and inhabited by monkeys. In the Ramayana, the articipants are not only human beings, but many others from God’s creation, intelligent, cultured and with their own achievements of spirit as well as physique: Jambavan was a bear, Jatayu was an eagle, Lakshmana—Rama’s brother—was himself a human incarnation of the Great Serpent Adisesha in whose coils Vishnu rested. (Narayan 90) Again, the story is told by listing statements of what is going on. As with the landscape, and even the characters themselves, nothing is depicted in the story-writing of the prose, but stated, as if the entire epic was a news article being reported by Narayan, as opposed to a vivid history with grand escapades and extreme characters. By translating an epic tale from poetic verse into shortened modern prose, the objective is ultimately to enable a broader audience to relate to and appreciate a classic tale. Poetry is a secluded literary world that does not have the mass appeal that modern prose does; yet Narayan’s re-telling is too constrained and overwhelmed by the amount of story condensed into it. By trying to constrain the length of the story to allow for more readers to get through it, Narayan’s ‘master narrative flair’ seems lost, and the epic tale is a heavy list of events that merely occur on the page.

Analysis of the Operations at Woolworths

Analysis of the Operations at Woolworths This essay is based on the analysis of the operations of the super market retail branch WOOLWORTHS, which is located in the heart of the Sydney CBD. Woolworths is a renowned chain of retail store in Australia and various other countries of the world. Woolworths have build up their standards of quality product and service for its customers. Current scenario of the Woolworths branch is that is having the problems with the personal performance of the branch staff, which has resulted in to decline of the quality of service leading to decline in the business for the branch. The purpose of this essay is to determine the various factors that determine the quality of service and identify the factors leading to the problem of poor personal performance of the staff. The further part of the essay describes about the various strategies applied and various steps taken in order to maintain the effective running of the operations and the improving the quality of service up to the Woolworths standard. At last Essay provides the overall conclusion of the Woolworths operations ineffectiveness and also the lack of various strategies required for effective and smooth operation system. Main body Today in the era of global competition Woolworths have set their standards of operation and quality services to its customers. At Woolworths store they are conscious of their responsibilities- serving the millions of the customers in each and every community across Australia and New Zealand. With this profile comes not only a responsibility to understand and manage our impact and also manage the long lasting benefits in the retail sector. Woolworths operations have set standards, which affect the share holders, customers and supply chain. This essay claims to give an insight into how the Woolworths perform well in the retail operations against their commitment and targets, Woolworths operations are known for its quality goods and services around the various different locations. Woolworths has been at or near the top of that list since early this decade. Known affectionately as Woolies in Australia, the company has ramped up the refurbishment of supermarkets in an effort to retain and bring in new customers. Woolworths (2010). A recent review of the branch has highlighted that branch is not performing its operations effectively and efficiently. The reason behind this scenario is that, the staffs seem to have taken the standard of their personal performance for granted. As such, it is important to carefully examine and study the present situation of the branch and plan ways on how to improve and re-establish the status of the Sydney branch in terms of process, capacity design and customer satisfaction Issues affecting the performance of staff Under the perspective of operational management, the various critical issues identified for the decline in the personal performance and ultimately resulting in the decline of the service quality and the business for the branch are the capacity; demand forecasting, supply chain, design process and human resources and job design. Service process design Woolworths retail the product combination of the good and services, goods are tangible and whereas the services are intangible. Service referred as an act that is done to or for customers. Chwen Sheu, Roger McHaney, Sunil Babbar, (2003) support that service processes require the participation of the customer without the customer, service processes cannot take place. Service at Woolworths are produced and consumed simultaneously at the point when the customers are shopping at Woolworths. Woolworths have established the standards from the manufacturing to the retail outlet, the quality services which are provided by the Woolworths staff. Which are inventory handling, displaying goods on shelves and helping customers for the customers within the outlet, with low customer interaction. The various varieties of tangible products are available at Woolworths which requires the least customer service delivery. As the customers select the goods and bring it to the counter for purchase. The self checkouts counters are also available at the various other outlets of Woolworths, for the ease of the customers to cut down the need of the service from the Woolworths staff, though they have a staff available for the help of the customers at the self checkout counters and this cannot be considered as the pure form of service. So, organizations those are dependent on customer participation causes difficulties in managing effective service process design. Service is provided by a service delivery system which includes facilities, processes and skills needed to provide the service (Stevenson 2009). In the case of Woolworths retail outlet there is inadequacy found in measuring service quality performance based on discussed criteria which leads to poor service quality and declining customer satisfaction. Forecasting issues Forecasting is considered to be the most important function in the retail organisation, as it enables the mangers to foresee the future needs and perform the related functions accordingly. Such as ordering of the next supply, managing the inventories, staffing is also equally linked with the forecasting functions. The quality of this business can only be good on the basis of its forecast. In todays economy where business condition is unstable forecasting is a bit difficult. (Aviv.Y, 2001). The Woolworths branch at Sydney CBD is also struggling with the forecasting issues, due to lack of countable performance of the Grocery manager. Retail organizations today must strive to satisfy the unique demand for each of their customers. Gone are the days of the mass market where a single assortment, standard pricing and a single average location forecast would satisfy consumer demand in all stores. To be effective, forecasts today must account for demand differences across all stores, geograph ies and product lines. The store manager is also incapable in providing the commendable performance due to the lack of interest and the availability of the old procedures. The resources available to them are not adequate and lack the evidence. The manger is completely dependable on the quantitative approach which includes the past historical data or the casual variables to forecast demand whereas the forecasting of the demand of the goods sold also requires the qualitative approach that is the incorporation of the factors such as the decision makers emotions, personal experience and value system. Demand and Capacity management Heizer and Render (2003) suggested that in the view of service industry scheduling customer is demand management and scheduling workforce is capacity management. Heizer and Render (2003) also support that the demand management is attempting to influence when customer attend the service and capacity management is ensuring the organization capability to meet the demand. In the operation of retail industry such as the Woolworths store, demand management is the management of the demand created for the goods and services at the store by the customer intended to purchase the goods and service according to their taste and preferences. Planning and providing the customers goods and services they desire at the time of their shopping is the capacity management. Various customers visit the store on daily basis and purchase the goods and consume the services according to their ease, the staff at the Woolworths is unable to handle the demand and deliver the goods and service according to their capacity. Understanding the demand is not sufficient to manage the demand fluctuation. It also involves the organizations capacity to fulfill the demand. Therefore, it is imperative for an organization to understand its capacity constraints in terms of time, labor, equipment, and facilities. The major challenge faced by outlet is the short of the capacity to minimize the waiting time of the customers at the purchasing counter. The lack of equipment and staffing during the peak hours has created a gap between the demand and the capacity of fulfilling the demand. Klassen K.J Rohleder T.R. 2002. Supply Chain management Supply chain management is considered to be the oversight of the materials, information and finances as they move in to a process from supplier to manufacturers to wholesalers and from retailer to consumers at the end. Supply chain management is said to be the integration of the activities that procure materials and services transform them into intermediate goods and final products and deliver them to the customers Effective Supply Chain Management can offer customers high quality products and services with low prices (Waller L.D 2003). Supply chain management involves the coordinating and integrating these flows with in and among the companies. The ultimate goal of the effective supply chain management is said to reduce the inventory and with the assumptions that products are available when needed, (Render.B, Heizer.J 2003). Supply chain management includes determining the following for the effective running of the operations. Transportation vendors, Credit and cash transfers, Suppliers, Ware housing and inventory Woolworths being a growing super market store in Australia, they have large number of suppliers supplying the various goods in store. However this store of Woolworths faces many challenges with the supply chain management, Such as the bulk order delivery of the goods at the receiving dock and lack of storage space for the certain products. Also the inappropriate tracking system of receiving and ordering of goods, they also suffer from Bullwhip effect, staffs of Woolworths branch stand helpless for the insufficient delivery of the goods and services by the suppliers. Due to the management problems the staffs of the Woolworths fails to provide the quality of goods and services to its customer due to the ineffective inventory management systems and control. Also due to the poor handling of the stock, store also suffer from the various product in to dump due to their expiry date and out of demand. Human resource issues Human resource foremost objective is to manage labour and design jobs so people are effectively and efficiently utilized and also they have the quality of work life in an atmosphere of mutual commitment and trust for instance the job which is not reasonably safe also for which the pay is equitable and also achieves the physical and physiological requirements. Various following issues which have lead to the performance of the staff to decline and ultimately loss to business. Memmott Growers (2002) Job design Job design refers to the way tasks are combined to form complete jobs (Robbins and Stuart-Kotze). Using job design principles results in clear job descriptions, a motivated workforce and successful completion of tasks. People are assigned to a job because they are perceived to be able to fill its requirements. . A proper job design makes jobs meaningful, interesting and challenging. Individual needs, task attributes and work setting lead to performance and satisfaction (Wood et al. 2006). According to Stevenson (2009) job design is one of the oldest aspects of operations management. Work design refers to specifies the tasks of each individuals in terms of working environment and methods of doing job is called job designing. The job design helps in smooth running of the operations; the Woolworths human resources department recruit the individual for the specific job role centrally and appoint it to the various stores. Staffs at the CBD store are appointed but there is no further induction programme to guide their duties and to use it skills for serving the customers and gaining the customer satisfaction. The store manager should have the various programmes to develop their staff according to their skills and the environmental conditions. They should more specifically distribute the staff according to the need and requirement of the task with the proper planning; this will help the store in attaining the proper utilisation of the labour and time for the specific job. The staffs at Woolworths get exhausted or losses interest by repeatedly performing the same task again on daily basis. The branch management due to lack of coordination between the store and lack of supply management system fails in designing the job for the better utilisation o the labor force. The staff also lack in control or quick decisions required at the time of operations. Although the standard work schedule in Australia is still five days and 8- hours a day and which includes the half hour break. The Woolworths store at CBD largely experiences the no show and the absenteeism of permanent staff, which results in loss of customer satisfaction and reduces business. The reason of no show and the absenteeism is the unsuitable working hours for the staff and also the long working hours lead to the no show of staff on the day of work. The above discussion of the psychological components of job design provides the insight into the factors that contribute to the job satisfaction and motivation. Motivation is a key factor in the smooth and effective running of any business. It influences the quality and the productivity of the employees working in the organisation. Monetary satisfied employee is more likely to perform well comparative to the less satisfied staff. Employees are more likely to continue their employment at a company where they can communicate openly and freely with all aspects of management, up and down chain of the command. This benefits not only the employees also the organisation (Slack et al, 2004). Work life balance from employee apparent is described as the maintenance of a balance between work life (the time spent for working at job) and life at home (that is different roles and responsibilities at home) whereby it is further been described as participation in one role has made difficult to be hundred percent in another role (Barodel, Tharenou, Moss, 1998). Due to lack of staff at the Woolworths the current staff is made to perform long hours and given limited off, which has currently resulted in the poor performance standard by them, as they are not been able to maintain balance between their professional and personal life. In order to solve the various issues with the Woolworths branch following strategies will be drawn in the further part of Essay. A well functioning process delivers the proper service. In addition Schroeder (2008) draw two key issues in service designs are the degree of variation in service requirements and the degree of customer involvement and customer contact in delivery process. These issues have an influence on determining the degree to which service can be standardized. That is every customer gets more or less the same service or highly customized to customer requests, and exactly the same service is virtually never repeated for the another customer. Woolworths Management facing challenges in designing service process to match with the requirement of the customer. The important tools that can be applied to the designing process of the service are Service matrix and Customer contact matrix. Teasley. C. E. III Ready. R. K. (1991). In case of Forecasting, Forecasts drive a businesss production, capacity and scheduling system which can directly affect the operation in finance, marketing, and personnel planning department. To maximise use of resources, capacity planning should be carried out. Klassen and Rohleder 2001) recommend four general strategies for demand forecast and capacity planning. Firstly, match that states matching capacity exactly to demand. Secondly, provide that maintains capacity at a certain level that can afford maximum demand. Thirdly, control that control demand to be at average level and fourthly, influence which influence in reducing magnitude of peaks and valleys of demand and match capacity to the resulting pattern. It is an important tool for the Woolworths management to overcome the forecasting issues as it will help in gaining the knowledge about the customer taste preferences and demand for the various goods and services at Woolworth store. Retail-oriented operations management research has focused on a variety of issues, including forecasting techniques, the use of vendor-managed inventory (VMI), and the operational antecedents of service quality and profitability. Organization having well operation system delivers the proper service. (Andrews and Parsons, 1989). The two key issues which are considered in service design is are the degree of variation in service in service requirement and the degree of customer involvement and the customer contact in delivery process these issue have raised the concerned for the determining the degree to which and what standards the degree can be standardized. According to the Hayes (1996) another strategy that can be effective is the customer contact matrix. In this system the customer contact is eliminated for the better efficiency such as the self checkout counters which help customers in purchasing the goods at the counters of their own, the Woolworths management needs the self chec kout counters also the staff which help them in guiding the customers from the selection to the purchasing goods, other system are costly but they require high interaction of the staff with the guests, with the low involvement of staff for the service and customers full involvement in purchase increases the rate of high satisfaction among the customers. Demand and capacity management strategies To determine the capacity of resources and maximizing the use of the resource, also to achieve profitability in the operations Break even analysis is the efficient tool for evaluating the capacity (Waller L.D 2003). With the help of this tool branch management can analysis the status of the store, as it provides the clear picture of the number of the goods produced and sold. This advance tool is appropriate to measure the large investments involved. This approach will help in gaining the clear picture of the branch goods produced and sold. Another tool for the total quality management is the six sigma. Six Sigma is the comprehensive system for achieving and attaining the business system. By implementing the Six Sigma improvement model which first defines the critical output and identifies the gaps for improvement, secondly measures the work and collects the data for the process that can help close the gaps. Thirdly analysis the data fourthly improves the data by modifying the or redesigning the existing procedures and lastly control the new process to make sure the performance levels are maintained Implementing the Six Sigma is a big commitment is the Woolworths management implements in the operations to improve the quality of the service and the goods it will help in raising the customer satisfaction. Planning and Scheduling System: To attain the efficient operation system, that is the capacity of the outlet, customer demands. Woolworths management can use the advance planning and scheduling system. With the help of this system the Woolworths management can use the linear programming techniques and other algorithms to develop planned schedules. In this system the Woolworths can manage the future demand efficiently for instance what to order and how much to order to the various suppliers. Effective human resource Labor planning Labor planning is the means of determining the staffing policies dealing with the employment stability and work schedule. The major problem with the Woolworths CBD branch is to maintain the work schedule of the employees. In todays fast pacing environment the employees require the flexi timings at work. Flexitime allows the employees within limits to determine their own schedule, as this policy provides employees more sovereignty and independence on the part of the employee. Similarly it is effective for the management on the cost point of view as it enhance the job satisfaction. Another option is the flexible work week; this plan often calls for the fewer hours but the longer days in week With the help of the flexibility in the working hours of the employee Woolworths can gain the job satisfaction from the employees by managing the staffing according to the employees availability, as it will help them in gaining freedom to work and manage their social life. Managers in the organisations must build or rebuild loyalty and commitment, and create a positive organisational climate in which employees are motivated to achieve at high levels of work performance .To motivate the employees monetary rewards take the form of bonuses, profit and gain sharing and incentive systems. To motivate the employees the various schemes can be adopted such as the incentives system is based on personal productivity of the employee. It helps in motivation the employees to produce or give the best above the predetermined standards. Also the staff must be maintained with the different job role every week. That is variety is added to the employees prospective of job. It helps in marinating the interest of the employee at workforce Conclusion Finally concluding the essay, the issues raised in the essay due to incapable delivery of employees is affecting the operations performance standards. Various issues, such as the poor service design and selection, process inadequacy, inefficient supply chain management, improper forecasting, and inefficient human resource system. In balance capacity management is together affecting the customers satisfaction standards. Due to the nature of the retail industry in the process of customer service, the design of service for the customers should be present. Changing according to the change in the customer requirement is the basic ingredient of the retail industry; customer satisfaction can be gained by providing better delivery of goods and services to its customers. If the customers are satisfied they will not only provide repeat business but also share their personal positive experience with others. Customers with the high level of satisfaction will provide profitability to the business than those who are merely satisfied. To maintain the high standards of the employee performance it requires the employees who are flexible, smart, presentable, and adaptable. Quality control is the important factor for the retail outlet. For the better quality and minimizing the errors the Six Sigma can help in improving the quality control tool in the branch. As the part of the action plan, the major focus of the management should be in minimizing the efforts Essay raises the issues which as the efficient operation managers are assessed and various operations tools to improve the quality of the service and the personal performance of the staff. With the implementation of the strategies such as the Six Sigma, incentive system and work schedule will help in improvising the performance standard of the staff. The Sydney CBD Woolworth is currently requires the designing of the operation system that is the management communication strategies. The employee at Woolworths have suffered from the improper design system and management strategies which lead to the loss of motivation and resulting in the decrease of their own personal performance system. References Andrews, B.H. Parsons,L.L. 1989, Bean chooses a telephone agent scheduling system, Interfaces, vol 19, issue 6,pp.1-9. Aviv.Y, 2001, The Effect of Collaborative Forecasting on Supply Chain Performance, Management Science; Oct2001, Vol. 47 Issue 10, p1326-1343. Cheng,T.C.E. Gupta, M.C., 1989 Survey of scheduling research involving due date determination decisions, European Journal of Operational Research, vol 38, pp. 156-166. Bardoel, E., Tharenau, P., Moss, S. (1998), Organizational predictors of work-family practices, Asia Pacific Journal of Human Resources, vol. 36, pp. 31-49. http://vs7pm8vz2k.scholar.serialssolutions.com/?sid=googleauinit=AVaulast=Hillatitle=Research+opportunities+in+service+process+designtitle=Journal+of+operations+managementvolume=20issue=2date=2002spage=189issn=0272-6963 Emerald, 2008 viwed on 1st September 2010 http://www.emeraldinsight.com/journals.htm?articleid=849489show=abstract Emerald, 2008 viewed on 2nd January 2010, http://www.emeraldinsight.com/Insight/viewContentItem.do;jsessionid=973CD37AFF9D1D81F4DD00B02EB9E7D1?contentType=ArticlehdAction=lnkhtmlcontentId=849407 Hayes, R.H. Wheelwright.S.C., 1979, The dynamics of process-product life cycles, Harvard Business Review issue 57, vol.2, pp. 127-136. Human resource motivation and flexibility viewed on 27th Dec 2009, http://postharvest.tfrec.wsu.edu/PC2002G.pdf. Heizer and Render 2003, Operation Management, Pearson Prentice Hall. 7th edition, pp 694-695. Important demand and capacity, 2008 viewed on 2nd January, 2010, http://www.icmrindia.org/courseware/Services Marketing/SM-DS8.htm Klassen K.J Rohleder T.R. 2002. Demand and capacity management decisions in services: How they impact on one another International Journal of Operations Production Management, Volume 22,ÂÂ  Number 5, pp. 527-548(22). Memmott Growers (2002), Retaining and Motivating Employees. http://postharvest.tfrec.wsu.edu/PC2002G.pdf Robbins, Stephen P. Stuart-Kotze.,R., 1986, Management: Concept and Practices, Canadian Edition. Toronto: Prentice-Hall pp. 125-140 Stevenson, 2009, Operation Management, 10th edition, Mcgraw-Hill, USA Symantec Corporation, 2008, viewed on 2nd January 2010, http://eval.symantec.com/mktginfo/enterprise/other_resources/ent-other_resources_the_capacity_to_succeed_dacm_03-2008.en-us.pdf Teasley. C. E. III Ready. R. K. 1991. Human Service Matrix: Managerial Problems and Prospects, Public Administration Review. Vol. 41, No. 2, pp. 261-267. Thompson, M, G. 1995, Improved Implicit Optimal Modeling of the Labor Shift Scheduling Problem, Management Science, Vol. 41, No. 4 pp. 595-607. Waller L.D 2003, Operation Management a Supply Chain Approach, Thomson Learning, 2nd Edition. Pp 365, 559-628.

All Men By Nature Desire Knowledge

All Men By Nature Desire Knowledge All men by nature desire knowledge quoted from Aristotles work Metaphysics. Aristotle raises the idea of humans need for knowledge. Since the dawn of human life, we have been trying to acquire knowledge in all different areas of life , and in order for us to believe that piece of knowledge, we request supporting evidence that is based on various ways of knowing. To what extent we require evidence to support our beliefs varies with different areas of knowledge. Some areas of knowledge require a certain degree of evidence. However, in other areas evidence is not required to support belief; Mathematics, the natural sciences and the human sciences are knowledge fields that require a degree of logical evidence due to their highly logic-based nature. On the other hand, belief in the arts, ethics and religion is not dependent on evidence. Mathematicians search for patterns then formulate conjectures, furthermore through deductive reasoning using the rules of inference and axioms they provide proof to these conjectures. Conjectures that have already been proven are often called theorems. Proof in mathematics is obtained through deductive and inductive reasoning rather than empirical arguments and the proof must demonstrate that the conjecture is true in all cases, without any exceptions. Mathematicians employ deductive logic through combining the axioms, definitions, and earlier theorems in order to provide proof for their conjectures. Considering two even integers A and B. Since they are even, they can be expressed as A = 2x and B = 2y respectively for integers x and y. Thus the sum A + B = 2x + 2y = 2 ( x + y ), from this it is clear that x + y has 2 as a factor consequently x + y are even. As a result, the sum of any two even integers is even. Establishing the truth of this conjecture was done through employing logi c through combining the definition of even integers ( A = 2x ) and the distribution law ( 2x + 2y = 2 ( x + y )). Briefly, in order for a statement to be believed in the area of mathematics it requires a high degree of logical evidence based on deductive and inductive reasoning combined with mathematical axioms, definitions and prior theorems to support mathematicians belief in that statement. Other areas of knowledge such as the natural sciences require a relatively average degree of evidence. The natural sciences branch into three main fields; Biology, chemistry, and physics. These sciences aim to study the natural rules and laws in which the universe obeys. At first scientists seek patterns in the world around them through empirical observation and then formulate generalizations concerning these observations, and through the use of logic discover the reason of such patterns. Evidence of a correct theory is induced by logical reasoning through the observation of the universe. Considering Newtons discovery of gravity, at first Newton observed an apple falling off an apple tree, and Newton as a scientist already knew that in order for an object to move it requires force in the same direction. Through the use of logic, Newton concluded that there is a force beneath him that pulled the apple in its direction. Briefly, in order for a theory to be believed in the natural scie nces it requires a degree of logical evidence based on observations of nature. The human sciences is an area of knowledge that requires a relatively low degree of evidence to support belief in that area. Human sciences investigate human activities in order to assemble theories predicting human behavior. Proof of such theorems is acquired through the observation of sensory experiences and by means of objective observation of psychological experience. One of the most significant and known theorems in this field of study is Freuds psychoanalytic theory, in which Freud assembled a theory to analyze human behaviors. The general concept of the theory is that unconscious motivations, sex and violence in specific, of human beings influence the development of their personality. Freud supported his theory with evidence he acquired through employing logic in the observation of the humans development process and the humans behavior at each stage of development. The extent of evidence that Freud used to support his theory was relatively low and subjective in comparison with other areas, he supported his work using empirical observation, nevertheless many people today believe in his theory and it is well-known worldwide. Briefly, in order for a theory to be believed in the human sciences a degree of evidence must be present, however, the degree of evidence is small and subjective in relativity to other areas. On the other hand some areas of knowledge require no evidence to support a belief in a knowledgeable statement. To begin with, it must be understood that the arts discipline encompasses literary, visual and performing arts. The definition of a good piece of art is creative and original nevertheless the genuineness of a piece of art lies in the perspective of the viewer. Obtaining a persons belief in genuineness of a piece of art whether visual, literary, or performing is not dependent on providing evidence that the piece is genuine, but lies in the viewers sensory perspective of that piece and his prior background in arts. As a result, this lack of evidence lead people to use each others sensory perspective and experiences as evidence. For example, an amateur artist would take the word of an experienced artist in believing in the originality of a piece of art. Another area of knowledge requiring no evidence to support belief is ethics. Ethics is an area of knowledge that addresses issues concerning concepts of right and wrong, generally concepts of morality. Ethical systems and theories are postulated in order to encourage people to turn their attention from the world around them to themselves, consequently encouraging people to realize their full potential and achieve full self-awareness. Ethical theories do not need evidence to support the peoples belief in their concepts, simply because humans are born in pursuit of knowledge in order to realize their full potential, thus no evidence is needed. Considering Aristotles postulated ethical system self-realizationism in which Aristotle suggests that when a person acts in accordance with his nature and his full potential , that person will be good and content; Aristotle needed no evidence to support his theory due to our continuous pursuit of self-actualization. Briefly, the need for evidence to support others belief in ethical theories is not needed due to our constant search for knowledge which we seek in order to reach our full potential, and achieve the highest state of self-awareness. The final and most significant area in which evidence is not required to support our belief is religion. Religions from Christianity to Hinduism suggest a set of beliefs concerning the purpose of our life in this universe, suggesting the supernatural divine God which represents our creator and the reason behind our existence. The most significant belief that religions set is the belief in the presence of God, the presence of a superior being or soul is impossible to prove thus the creative idea of faith takes control; faith is the idea of believing without the need for evidence. The creation of such an idea is brilliant due to the fact that faith suppresses our need to perceive and scientifically understand the concept of the superior God. It could be argued that religion often opposes itself in some ideas. For example the idea of God is almighty, God can do everything is controversial. This statement implies a generalization that due to its enormous size causes contradiction. This c an be clarified by asking the question Can God create a rock that he himself cannot destroy, if the answer is yes then God is not capable of destroying the rock, consequently not capable of doing everything. On the other hand, if the answer is no then God is unable to create everything. This paradox created, due to the extent of generalization, in that statement shows that no evidence is needed to believe in the idea of God. In the Theaetetus, one of Platos dialogues concerning the nature of knowledge, Plato argues that knowledge always involves belief. After studying the extent of evidence required to support belief in all areas of knowledge, it is clear that belief is present in all areas of knowledge although minimal in scientific areas. An inverse relationship between the need for evidence and the need for belief in an area of knowledge is noticed; as the belief is minimal in areas like math, the evidence required to support it is maximum and vice versa in other areas like religion. As humans, our curious nature demands evidence in order to acquire our belief. To sum up, the extent of evidence required to support a persons beliefs in different areas of knowledge is not only dependent on each area, it is also dependent on the person himself and his/her prior knowledge.

My Experiences as a Medical Social Worker Essay -- career, medical soc

Within the past week, I was able to meet a patient that had been through a very difficult life. He was admitted into the hospital almost one month ago because he had a stroke. He was a carnival worker and was only planning to be in Lexington for a temporary amount of time until the carnival left. When he was admitted into Saint Joseph Hospital, there were no indications that he had family and/or friends that should be contacted. At first, he was unable to talk, and his mobility was extremely limited. Last week, I was shadowing a social worker that had been asked to help fill out an application for this patient to qualify for Social Security because he now had a disability and would be unable to work. This patient didn’t have insurance, and we were determined to help him in any way possible. We went into his room to ask him very simple questions that were on the application, and he was helpful about remembering his past work history over the past 15 years. Unfortunately, he did not have a bank account, had no assets, and had been working as either a company driver and carn...

Christ of the Holy Bible and Dionysus of Euripides Essay -- Comparison

Christ of the Holy Bible and Dionysus of Euripides    Christ resembles Dionysus in many ways. Is it possible that Christ is simply an extension of the Dionysian myth? Though the concepts of wine and faith unite the two, the idea of revenge compared to self-sacrifice separates the two deities. Dionysus fits the Greek understanding of vengeful and selfish God that bear more anthropomorphic traits than Godly traits. Christ, however, transcends human desires for revenge and acts in self-sacrifice. This is the key separation between them. The similarity between the two Gods is striking. Dionysus is associated with wine and revelry. Christ forever associated himself with wine and celebration through the act of Communion and the Wedding at Cana. Contrary to many popular beliefs, Christ is a celebratory God. The Bible lists many occasions where God accepted the gift of his followers' song and dance. 2 Samuel 6:14, "David, wearing a linen ephod, danced before the Lord with all his might." Dionysus also encourages festivities. "I came to this city of Greeks when I had set ...

Politeness and Pragmatics in the Context of Cross-Cultural Communication

Throughout almost all societies, politeness plays an integral role in the effectiveness of social life and interaction within the context of both inter-cultural and cross-cultural communication. Within different cultures the definition of politeness may vary substantially and as a result may be appropriated in ways that are largely misunderstood within the context of other cultures.It is for this reason that scholars such as Brown and Levinson have derived theories on politeness and its use within global society, however the seemingly non-existent universal definition of politeness can also be responsible for the criticisms that these theories receive. When discussing the notion of politeness, the study of cross-cultural pragmatics as represented by Thomas, Tannen and Wierzbicka provide a deeper understanding of the appropriation of politeness and the difficulties that emerge as a result of cross-cultural misunderstanding.One of the major theories surrounding politeness is that of Br own and Levinson (1978, later revised in 1987). Brown and Levinson’s theory argues that politeness consists of three basic elements of human interaction: the maintenance of personal face, the acts which may threaten the face of either a speaker or hearer and the politeness strategies used within the context of conversation to maintain face. The concept of ‘face’, according to Brown and Levinson, outlines the human desire of avoiding embarrassment or humiliation whilst maintaining a positive representation of themselves.In accordance with the politeness phenomena theory, face exists in both a positive sense and a negative sense. Positive face is defined simply as ‘self-image’ while negative face refers to the freedom from imposition. The face-threatening act, according to Brown and Levinson, exists in four main categories. Firstly, the act which threatens the hearer’s negative face can include orders, advice, etc. and can ultimately undermine t he hearer’s freedom of action whilst criticism and disagreement can lead to a threat on the hearer’s self-image.Alternatively, acceptance of either apologies or thanks can impact on the speaker’s negative face although issuing an apology or offering a confession can upset the self-image of the speaker. Brown and Levinson theorise that â€Å"the assessment of the seriousness of a face-threatening act involves the following factors in many and perhaps all cultures† (1987, 74). These factors include Social Distance i. e. he acquaintanceship between speaker and hearer, the Relative Power of the speaker in relation to the hearer such as the degree of imposition the speaker holds over the hearer and the Absolute Ranking of the imposition within the context of the culture in which the imposition occurs. The third basic notion of Brown and Levinson’s politeness phenomena theory is that of Politeness Strategies, or simply the formulation of messages in orde r to save the face of the hearer in the wake of an impending face-threatening act.Brown and Levinson outline politeness strategies as being either ‘On-Record’ or ‘Off- Record’. Off-Record strategies avoid the use of direct impositions to maintain a hearer’s face whereas On-Record strategies can be further separated into four categories. Carrying out an act ‘Baldly, without redress’, refers to the act between a speaker and hearer who share a great deal of familiarity and thus make no attempt to avoid the most direct form of imposition. Redressive action’ is the act of the speaker imposing on the hearer while trying to adjust their behaviour to maintain either the positive face or negative face of the hearer. Redressive actions aimed at preserving the positive face of the hearer are known as ‘Positive politeness’ and are employed to enhance the hearer’s self-image.These include the exaggeration of interest in the hearer and his or her interests, sympathising with the hearer and the avoidance of disagreements. Negative politeness’ is a Redressive action aimed at the preservation of the Hearer’s negative face. Negative politeness is achieved through indirectness, deference and apologising for imposition. The politeness theory phenomena has drawn much criticism in subsequent years due to its universality. For example, Goffman advocates that â€Å"each person, subculture and society seems to have its own characteristic repertoire of face-saving practices, yet these are all drawn from a single logically coherent framework of possible practices† (1967, p. 13).Put succinctly, this argument suggests that face does not necessarily belong just to the individual, but rather to sub-culture and society as well, and as a result one concise theory, no matter how logical, cannot possibly serve to represent all cultures in global existence. Tannen, in her discussion of The Pragmatics of Cross-Cultural Communication, outlines several instances in which politeness may become lost in instances of cross-cultural interaction. She outlines eight levels of conversation: when to talk, what to say, pacing and pausing, listenership, intonation, formulaicity, indirectness and cohesion and coherence.In each of these instances misunderstandings may occur and as a result the concept of politeness may be lost. One example provided outlines the difference between American and Japanese businessmen: â€Å"Americans as a group tend to ignore or even rail against indirectness [†¦] but it gets American businessmen in trouble when they try to skip the small talk and get right down to business with Japanese [†¦] counterparts, for whom elaborate ‘small talk’ is big and essential, furnishing the foundation for any business dealings. (1984, p. 193). Thomas simply defines cross-cultural pragmatic failure as the hearer’s inability to ascertain meaning from the speaker. She outlines two distinct types of pragmatic failure: pragmalinguistic failure and sociopragmatic failure. Pragmalinguistic failure occurs when an utterance from a speaker is misused and thus misinterpreted by a native speaker. Sociopragmatic failure is used to â€Å"refer to the social conditions placed on language in use† (Thomas, 1983).These factors are large contributors to the notion of politeness being lost in the context of cross-cultural communication i. e. the dismissal of a compliment by a hearer of non-Western origin (a norm in many non-Western cultures) may be viewed as rude by the issuer of a compliment of Western origin. While Brown and Levinson’s study on the politeness phenomena allows us a greater insight into the workings of politeness in social context, it is fairly evident that its universality is not entirely representative of the practices of all cultural groups.While it can be said that face and face-threatening acts and the resulting po liteness strategies are the basis for much of the appropriation of politeness in human interaction, we must look deeper when discussing politeness on a cross-cultural level. This is evident through a deeper study of the use of politeness in a cross-cultural context and the failures that result in cross-cultural pragmatism.

Assessment Record and Feedback Sheet Essay

1. Understand the communication principles of computer networks 2. Know the main elements of data communications systems 3. Be able to implement different forms of network communications. (P5 – P6 – M2 – D2) Assignment Target Grade Final Grade Achieved Tutor Signature and Date Pï  ± Mï  ± Dï  ± Grading Criteria Date Achieved Date Ref’d 1st Date Ref’d 2nd Assessor Comments Address all comments directly to grading criteria. Please state clearly whether Formative or Summative feedback. Assessor Initials P5 – Describe the principles of signal theory P6 – Describe different transmission methods used M2 – Explain why particular transmission methods are chosen in particular situations D2 – Compare the effectiveness of different transmission methods Functional Skills Feedback Please include comments on English / Maths / IT General Comments and Performance Against Standards STUDENT’S COMMENT Comments on assignment feedback, including your Action Plan for next assignment. CHOOSE ONE of the following questions to answer with regard to your assignment: 1. What did you find difficult about the assignment? 2. What did you find enjoyable? 3. What else would you like to know about this particular subject/topic? 4. How are you going to improve your grade in future assignments? 5. How could you improve your literacy, numeracy or IT skills? 6. What do you feel needs to be done to improve this assignment and how will you do this? 7. Your lecturer’s comments Assignment-2 (Brief) Unit No. 10 Unit Title: Communication Technologies P/M/D Criteria covered: (P5 – P6 – M2 – D2) Learning outcomes – On completion of this unit you should: 1Understand the communication principles of computer networks 2Know the main elements of data communications systems 3Be able to implement different forms of network communications. Scenario A client wishes to know more about the issues surrounding the transmission of data. In this assignment, you will produce a series of mini reports to demonstrate your understanding of the various aspects of data transmission and the principles of signal theory. Task 1 (P5) This task will provide evidence for: P5 Describe the principles of signal theory 1. Signal Theory: With the aid of a diagram explain how data is represented in a digital format. What is a bit? What is a data packet? Draw a data packet and explain the individual parts. Explain synchronous and asynchronous transmission. Define bandwidth and give four common measurements from slow to fast (e.g. Bits Per second (bps) being the lowest). What is data compression and how is it beneficial to a network? 2. You should also explain with the aid of clearly labelled diagrams, how data gets from one point to the other by describing the following: Simplex, half-duplex and full-duplex. Serial and parallel communication. Task 2 (P6) This task will provide evidence for: P6 Describe different transmission methods used 1. Describe with the aid of drawings the features and benefits of the following transmission methods: a. Coaxial: i. Thinnet ii. Thicknet b. Optical Fibre: i. Single Mode ii. Multi Mode c. Twisted Pair: i. Unshielded ii. Shielded d. Wireless solutions: Radio- i. Explain how computers convert digital signals into radio waves. ii. List three strengths and weaknesses associated with radio transmission. Microwave- iii. What is microwave? iv. What are the main benefits of using microwave for data transmission? v. Explain point-to-point and point-to-multipoint microwave with suitable examples. http://www.intelephony.com.au/Networking/microwave Satellite- vi. What is a communication satellite? vii. What are the three main categories of satellite with regards to their position in orbit. viii. Explain the following MAC protocols for satellite links: 1. ALOHA 2. FDMA 3. TDMA 4. CDMA http://www.cse.wustl.edu/~jain/cis788-97/ftp/satellite_data/index.htm Task 3 (M2) This task will provide evidence for: M2 Explain why particular transmission methods are chosen in particular situations Based on the information produced for (P6) create a series of scenarios to aid your explanation of why certain transmission methods are chosen in particular situations. Task 4 (D2) This task will provide evidence for: D2 Compare the effectiveness of different transmission methods For this part of your assignment develop a detailed report comparing the effectiveness of the transmission methods described in P6. *Note: your report must focus on the good and bad points and not just be a description of the various methods.

Use Industrial Economic Theory to Assess the Extent

Vertical integration is the process of combining firms, usually under a single ownership, that are different parts of a larger production scale. This could be anything from two firms to all of the firms that make up the supply chain. Due to combining multiple smaller firms, this form of integration has an effect on the market power that the firm(s) has (Riordan, 2008). This differs to horizontal integration which is the combination of firms or expansion of a single firm at one particular point of the production process (Black, Hashimzade, & Myles, 2009, p. 206-7).Vertical integration is usually carried out in one of two ways. Upstream, which can be referred to as backwards, and downstream, or forward, and the definition is linked to the ownership or controlling party. Upstream is to your suppliers and downstream is to your buyers (Enz, 2009, p. 214). Although vertical integration is usually upstream or downstream it can also be balanced which is where ownership or control is shared b etween the firms in the supply chain. There are multiple benefits associated with vertical integration but some of the benefits may differ between upstream and downstream.Some benefits that may arise are improved coordination between firms throughout the supply chain, cost savings through internalized transactions and an increased market share (Fairburn, & Kay, 1989, p. 10). There are many examples of both upstream and downstream integration in industry throughout history. In the 1970’s and 80’s many crude petroleum extracting companies acquired downstream firms such as refineries and distribution networks (â€Å"Idea: Vertical Integration†, 2009).This is mirrored today with many oil companies such as Shell and BP owning all parts of the supply chain from extraction to the petrol stations supplying the consumers. Smithfield Industries are a meat producing firm that has benefitted from upstream vertical integration. They have integrated with a variety of farms, s laughterhouses as well as other firms that make up the entire supply chain. They now have ownership or decision making power, such as changes to production levels to match changes in demand for the final products, in all the firms that supply them.As a result they now have 26% of the meat and poultry market (Pepall, Richards, & Norman, 2008, p. 449) as well as receiving other benefits such as maintaining a sustainable supply for larger numbers, having control over product quality (such as the leanness of the meat) and they have designed warehouses and barns for their subsidiaries to improve their operational efficiency. Most of these benefits are predominantly in favour of the retailer Smithfield as much of these benefits are associated with lowering costs across the supply chain which lowers their final input costs.These benifits, that are associated with lowering input costs, all indicate that Smithfeild do not suffer from double marginisation as a result of thier vertical integra tion. Double marginalisation is when all the integrated firms set a price above the marginal cost (MC) which then creates two sets of surpluses that are incurred, also reducing consumer surplus to make all parties worse off. Pepall, Richards & Newman state that this is not possible if there is competition either upstream or downstream in the chain (2008, p. 438).This is because competition can cause the wholesale price of inputs to be at the MC to either keep the upstream firm competing or the downstream firms final price competitive. Competition upstream that causes production at the MC can help the downstream firm, in this case Smithfield, achieve abnormal profits if they have monopoly power and the ability to descriminate thier prices. Although most of the benefits are for Smithfield, the subsidiaries will benefit from having more efficient processes and economies of scale that may be gained from the integration due to investment received from the parent firm.The profitability of the integration is linked to the level economies of scale obtained from it as the ability to coordinate the adoption of new technologies associated with lower marginal costs for the subsidiaries will define how much profit can be made (Avenel, 2008, p. 248). As well as this they will benefit from having a reliable retailer that will have a consistent demand for their products. Although they will have a consistent buyer for their products the subsidiaries will have to receive a lower unit price for their products as a result of bringing down their costs after the integration.This is not a negative as the demand for their product is consistent and the fall in market price will be proportional to the fall in costs. As well as Smithfield, other meat and poultry production firms have benefitted from having highly integrated production chains such as Tyson, ConAgra and Swift (Pepall, Richards, & Norman, 2008, p. 449). The integration of these firms is consistent with Lieberman’s v iews (1991, p. 452) of why upstream integration may take place. The main reason which is applicable to this situation is that if the inputs in question account for a arge proportion of total cost (which animals being bred for meat will do) then the downstream firm is more likely to integrate. Although all these firms are highly integrated and could offer much lower prices than they already do to the consumers they choose not to. Having a higher mark up allows them to receive higher profit margins from the lower input costs while keeping similar market prices for their final output. This is a form of non-price competition in order to receive higher profits and an example of Nash equilibrium.Nash equilibrium is where a set of price levels or production levels for each firm will not be changed based on the decision of the other competing firms (Pepall, Richards, & Norman, p. 197), meaning that if one lowers their price the rest of the competitors will retaliate and all start undercutti ng theirs but could end up resulting in loss of profits based on how much the prices change. Nash equilibrium is common in large oligopolistic markets which are also the most common for vertical integration to take place in.This is an example of how the benefits of this integration will not be asymmetric as the final retailer can increase its profits relatively by a much larger amount than the subsidiaries they are purchasing their inputs from. All the benefits previously mentioned which are mainly associated with lower costs and prices also cause another benefit by causing barriers to entry. These are things that make it difficult to enter the market (Black, Hashimzade, & Myles, 2009, p. 29).In this case the low costs due to higher efficiency will make competition for a new entrant difficult and will in turn detour others from attempting to enter the market which will keep the level of competition for the existing firm lower, especially in the case of the meat and poultry market wh ere many of the largest firms are highly integrated. Partnerships are a form of integration that does not include control or ownership but can still provide many benefits, usually cost orientated, that may be associated with conventional integration.Partnerships often occur when both firms involved are large and it would not be cost-effective to attempt to buy them. McDonalds are a company that as well as being highly integrated they also have many partnerships with companies such as Coca-Cola, Heinze and Microsoft. In the case of the Microsoft partnership some of the benefits are streamlining operations and reducing the total cost of operations (â€Å"Microsoft Partners with McDonald’s for Global Point-of-Sale Solution†, 2005).As well as this Microsoft will also benefit by improving thier brand awareness, specifically for thier Microsoft Smarter Hospitality system. In conclusion all parties will benefit from vertical integration. But the benefits are not asymmetric. I n an upstream integration the majority of the benefits are gained by the retailer that sells the final product. This is because they can increase their market share as a result of the integration as well as their costs can be greatly reduced while keeping their price relatively similar and hence creating more profits.The subsidiary firms may still end up with higher profit margins but the proportional increase is unlikely to match that of their owner firm. Another reason that the benefits are not asymmetric and are greater for the retailer is that they gain control over the subsidiary and the subsidiary has to relinquish some or all control to the owners. This allows the retailer to dictate what is produced in preparation for possible changes in demand or product portfolio which could lead to the supplier being left with excess stock.The benefits from barriers to entry will not be asymetric. In many cases, including the poultry market, the upstream markets are more monoploistic and more competitive as opposed to a more oligoposlistic structure downstream (associated with higher barriers to entry) which is shown by the fact that a single downstream firm will own multiple upstream suppliers. Also the fact that the downstream firms will get more cost/price benefits show that the added difficulty for new firms to compete will be harder. Bibliography Answers. (2011).Vertical Integration. Retrieved November 15 from http://www. answers. com/topic/vertical-integration Avenel, E. (2008). Strategic Vertical Integration without Foreclosure [Electronic Version]. The Journal of Industrial Economics,56(2), 247-262 Black, J. , Hashimzade, N. , & Myles, G. (2009). Oxford Dictionary of Economics (3rd ed. ). Oxford: Oxford University Press Enz, C. A. (2009). Hospitality Strategic Management: Concepts and Cases (2nd ed. ). New Jersey: John Wiley & Sons Inc. Fairburn, J. A. , & Kay, J. A. (1989). Introduction. In J.A. Fairburn, & J. A. Kay (Eds. ), Mergers & Merger Policy (pp. 1- 29). New York: Oxford University Press Idea: Vertical Integration. (2009, March 30). The Economist. Retrieved November 12, 2011, from http://www. economist. com/node/13396061 Leiberman, M. B. (1991). Determinants of Vertical Integration: An Emperical Test* [Electronic Version]. The Journal of Industrial Economics, 39(5), 451-466. Microsoft Partners with McDonald’s for Global Point-of-Sale Solution. (2005). Microsoft News Centre. Retrieved November 24, 2011 from http://www. icrosoft. com/presspass/press/2005/dec05/12-07McDonaldsPOSPR. mspx Pepall, L. , Richards, D. , & Norman, G. (2008). Industrial Economics: Contemporary Theory and Emperical Applications (4th ed. ). Padstow: Blackwell Publishing Riordan, M. H. (2008). Vertical integration. In S. N. Durlauf, & L. E. Blume (Eds. ), The New Palgrave Dictionary of Economics (2nd ed. ). Palgrave Macmillian. The New Palgrave Dictionary of Economics Online. Retrieved November 12, 2011, from http://www. dictionaryofeconomics. com/art icle? id=pde2008_V000029

Natural Fiber Wide Use Health And Social Care Essay

Natural fibres have been in a broad usage since the development of the human race. Catching up the Eco thrust, applied scientists were looking for eco-friendly options for fictile fibre. In the due class many natural fibres have been tested and some were able to do their base going economically feasible. The present work proposes to fix and prove a Natural Fiber ( Asian Palmyra ) Reinforced Composite ( NFRC ) . The survey is planned in conformity to a 3-Level Factorial Design and find the fluctuation of Tensile Strength ( TS ) , of short and indiscriminately oriented Palmyra NFRC, under control parametric quantities such as alkali intervention clip, fiber length and fiber volume % . The present paper focuses to pattern the influence of procedure variables on TS through Response Surface Methodology. The mathematical theoretical account which is developed to foretell tensile strength is found statistically valid and sound within the scope of the factors. Keywords: A – Discontinuous support, B – Mechanical belongingss, C – Statistical properties/methods, D – Mechanical testing, E – Lay-up ( manual ) .1. Introduction:Natural fibre has been in a broad usage since the development of the human race. They had got broad acceptation in communities for their flexibleness and strength. Recent tendencies in the country of fibre reinforced complexs have drawn a twine in utilizing these natural fibres as their support. The natural fibre imparts lower lastingness and lower strength compared to glaze fibres. However, low specific gravitation consequences in a higher specific strength and stiffness than glass. Natural fibres offer good thermal, dielectric and acoustic insularity belongingss along with easiness in processing technique without have oning of tools. Most of these fibres are produced in developing states like China, India and Brazil etc. In a historical position complexs like straw reinforced walls, bows and chariots made of pasted beds played of import functions in their endurance. Though many of these fibres are limited to their epidemic parts due to high local demand for many old ages, coming of man-made fibres have affected the market of natural fibres. After being entirely used for their electromagnetic belongingss, utilizing complexs to better the structural public presentation of ballistic capsule and aircraft became popular in last two decennaries of the old century. Particularly, increased constrains and future environmental route maps, have been emphasizing automotive industries to diminish their C pes prints. These rigorous steps have become blessing to the lagging natural fibre industries, and thereby making new challenges for research workers in happening beginnings of fibre, fiction techniques and applications of na tural fibres. The easy handiness of natural fibres and fabricating have motivated research workers worldwide late to seek locally available cheap fibres and to analyze their feasibleness of support intents and to what extent they satisfy the needed specifications of good reinforced polymer complexs [ 1 ] . Many surveies proved them to be possible rivals to man-made fibre to some extent. After reexamining the bing literature available on natural fibre complexs, assorted writers had put attempts in planing complexs based on the demands of composite industry. There has been a broad assortment of literature available on natural fibres such aspen, abaca, bagasse, bamboo, banana, coir, day of the month thenar, flax, henequen, isora, jute, silk cotton, deccan hemp, oil thenar, Ananas comosus, ramee, sisal, etc. , [ 2-18 ] . Natural fibre complexs provide comparable specific strength with that of man-made fibre complexs, due the low denseness offered by natural fibres [ 19 ] . There are many parametric quantities which affect the public presentation of a natural fiber-reinforced complex. Chemical alteration improvesA fiberA matrix adhesion, their consequences and effects on the physical belongingss ofA complexs [ 20 ] . Aspect ratio has a considerable consequence on composite belongingss, henc e it is of import to conserve fiber length every bit much as possible during composite processing operations [ 21 ] . Mechanical belongingss of the composite vary with assorted sums of fibre volume ratio. But there have been a really few documents covering with Palmyra fibre, the present fibre of our involvement [ 22 – 24 ] . The Borasseus Flabellifer is a tall and vertical thenar, and can populate 100 old ages or more and make a tallness of 30 m, with a canopy of big, fan-shaped foliages several twelve found distributing 3 metres across [ 25 ] . Each and every portion of the tree is a noteworthy socio-economic value for people in Southern India. The mid-ribs of the foliages and the fibres from their chaffs are used in doing industrial coppices and brooms. The fibre has good opposition to clash and heat, and will defy many chemicals and dissolvers. The denseness of toddy palm ( 0.7 gm/cm3 ) is least among all known natural fibres that are being commercially used in fabricating natural fibre complexs. This is extremely favourable belongings from the position point of light-weightiness. The present complex can happen extended application in non-structural, low-performance utilizations. Hence, the toddy palm fibres are most suited for doing support in green composite stuffs. The present research focuses on the survey and consequence of procedure parametric quantities on the tensile strength of short and indiscriminately oriented palmyra natural fibre reinforced complexs. The decisions drawn from this is that, a successful combination of procedure parametric quantities consequences in the betterment of mechanical belongingss of the composite. In future, complexs will be manufactured even more harmonizing to an integrated design procedure ensuing in the optimal building harmonizing to parametric quantities such as form, mass, strength, stiffness, lastingness, costs, etc. The developed mathematical theoretical account will be able to demo the influence of a design alteration on each one of these parametric quantities ( here strength ) .2. RESPONSE SURFACE METHODOLOGY:Response surface methodological analysis ( RSM ) began with the work of Box and Wilson in the Journal of the Royal Statistical Society [ 26 ] . That work was motivated by the demand to run expe riments expeditiously, by a proper pick of design, and to find operating conditions on a set of governable variables that give rise to an optimum response. The cardinal thoughts in the classical RSM are developed utilizing additive multinomial theoretical accounts, chiefly first-degree and second-degree theoretical accounts, with uninterrupted response variables assumed, for the most portion, to be independently and usually distributed with changeless mistake discrepancies. This method has gone through several phases of development that are aimed at doing it more applicable to wider experimental state of affairss [ 27 ] . RSM is a aggregation of mathematical and statistical techniques that are utile for the mold and analysis of jobs in which a response of involvement is influenced by several variables and the aim is to optimise the response [ 28 ] . For, illustration, if the experimenter wishes to happen the degrees of two input variables, x1, x2 which maximize the output [ y ] of the procedure, so the procedure output is stated as: where I µ represents the noise or mistake observed in the response Y. If the expected response is denoted by E [ y ] = f [ x1, x2 ] = I · , so the surface represented by I · = f [ x1, x2 ] is called a response surface. If the individual input variable can be related to the end product variable so it is known as response curve and if the two input variables relate to the end product variable so it is known as response surface [ 28 ] . In common pattern, response surfaces are expressed diagrammatically and visualized through single secret plans, contours and 3D surface graphs.3. SPECIMEN Fabrication:The petioles of Asiatic Palmyra tree were soaked in a H2O retting armored combat vehicle for 45 yearss. After 45 yearss, the fibre can be extracted from the chaffs manually. These long uninterrupted fibres are washed exhaustively in plentifulness of clean H2O to take the excess waste ( fig. 1 ) .3.1 ALKALI TREATMENT:The obtained fibres were divided into three parts of equal weight. Th ese three groups of fibre were treated with 5 % NaOH solution for different clip continuances. The first group is treated for 2 hours, the 2nd for 4 hours and the 3rd for 6 hours. Chemical intervention with NaOH removes wet content from the fibres thereby increasing its strength. The chemical intervention besides clears all the drosss that are bordering the fiber stuff and besides stabilizes the molecular orientation. After alkali intervention, fibres were washed exhaustively in the distilled H2O and were dried for one twenty-four hours at room temperature. Then these long fibres were cut into short fibres of different lengths ( 3mm, 5mm and 7mm ) . The fibres which were treated for 2 hours with NaOH are cut into equal sums of 3mm, 5mm and 7mm fibres severally. Similarly, the fibres which were treated with NaOH for 4 hours and 6 hours were besides cut into short fibres. Therefore nine different samples of fibre were prepared which vary in fibre length and alkali intervention hours.3.2 PREPATION OF COMPOSITES:A rectangular wooden board of 300mm, 300mm was taken and wooden forms of thickness 4mm were fixed on these wooden boards with the aid of nails. These wooden forms were placed so that a infinite of 150mm, 10mm, and 4mm was obtained. After the molds of needed dimensions were prepared, wax was applied to the interior sides of the molds for easy release of the complex without lodging to the mold walls. Then the matrix was prepared by blending the hardener to epoxy. The epoxy and the hardener ratio were maintained at 10:1. To acquire goo d cured and a standard quality specimen, the epoxy and hardener must be assorted swimmingly and easy for about 10 proceedingss. Initial bed of the mold was filled with the epoxy rosin and hardener mixture and so the appropriate measure of fibres was placed such that epoxy mixture wholly spread over the fibres. Again, epoxy mixture was poured on the fibre. Therefore, the starting and stoping of the beds were of epoxy rosin. A fictile releasing house was placed on the top of the uncured mixture. Before using compaction, attempts were made to take all bubbles with roller. Finally, the compaction force per unit area of 0.05 MPa was applied equally and cured for 24 hours at room temperature. In this manner, specimens incorporating different volume fractions of fibre were prepared. These specimens were cured in the hot air oven at 600 C for 2 hours. Specimens incorporating different fibre volume fractions such as 20 % , 30 % , 40 % were prepared and 27 specimens were prepared. Natural Fib er Reinforced Composite ( NFRC ) is considered as the stuff for probe and its material composing is given in Table 4.1. The specimen ( Fig. 2 ) is prepared with the dimensions of 150mm length, 10mm breadth and 4mm thickness harmonizing to ASTM D 3039-76 [ 29 ] is used for experimentation.3.3 MECHANICAL Testing OF FIBER-REINFORCED COMPOSITE:The most basic mechanical trial is the tenseness trial. For most structural stuffs, the tensile belongingss are indispensable elements of the stuff design allowable. The complexs specimens were tested as per ASTM criterions. The tensile testing was done as per ASTM D 3039M with the aid of INSTRON-6025 theoretical account Universal Testing Machine ( Fig. 3 ) at a crosshead velocity of 2mm per minute and consequences were analyzed to cipher the tensile strength of composite samples.4. Plan AN Experiment:Recognition of job and job statement:â€Å" Determine the affect of Alkali Treatment Time, Fiber length & A ; % Fiber volume on the tensile strengt h of Natural Fiber ( short Asian Palmyra ) Reinforced Composite. †Choice of factors, degrees, scopes:Alkali Treatment Time ( A ) , Fiber length ( B ) , Fiber volume % ( C ) ( 3 Levels )Choice of the response variable:Tensile Strength of Natural Fiber Reinforced Composite ( T ) .Choice of experimental design:3 flat factorial design.Performing the experiment:Tensile strength on Universal Testing Machine ( UTM ) .Statistical analysis of informations:A, B, C relation to TDecisions and recommendations:Accomplishment of experiment aims.4.1 DESCRIPTION OF PROPOSED METHODOLOGYThe control factors considered for experiments are alkali intervention clip, fiber length and fibre volume per centum while tensile strength is considered as the end product response. The process of response surface methodological analysis comprises the undermentioned stairss [ 30 ] : Plan a series of experiments for equal and dependable measuring of the response of involvement. Develop an empirical or mathematical theoretical account of the 2nd order response surface with the best adjustments. Find the optimum set of experimental parametric quantities that produce a upper limit or minimal value of response. Represent the direct and the synergistic effects of procedure parametric quantities through two and three dimensional secret plans.4.1.1 Conducting the experimentsThe executable scopes of the procedure control variables considered are listed in Table 4.2. These values correspond to the conditions at which there is maximal consequence on tensile strength as reported by other writers for different natural fibres. The belongingss of Asiatic Palmyra fibre reinforced complexs with different fibre lengths, clip continuances of Alkali intervention and fibre volume per centums under these conditions, the probes are presented in the undermentioned Tables 4.3, 4.4 and 4.5. Sample of tensile trial studies are shown in Fig. 4. The tensile strength of the specimen made of epoxy and hardener is 12.44MPa.4.2 DEVELOPMENT OF EMPIRICAL MODELSThe informations collected from typical experiments refering to end product responses, Tensile Strength from Tables 4.3, 4.4 and 4.5 are used to implement the proposed methodological analysis. The demand in developing the mathematical relationships is to associate the tensile strength to the procedure parametric quantities thereby easing the optimisation of the procedure parametric quantities. Design Expert, 8.0v [ 31 ] , statistical analysis package, is used to calculate the arrested development coefficients of the proposed theoretical accounts. The interaction effects of the procedure parametric quantities and tensile strength are important and hence the 2nd order theoretical accounts are postulated. The multinomial is fitted and the relationships obtained for the end product responses are given below:4.2.1 Adequacy trial:The developed empirical theoretical accounts are tested for their adequateness utilizing the undermentioned trials:4.2.1.1 Analysis of Variance [ ANOVA ] :ANOVA is carried out for the quadratic response surface theoretical accounts. The statistics of ANOVA for Tensile Strength is given in the Table 4.6. In instance of tensile strength, it can be observed from Table 4.6 that the value of â€Å" Probability & gt ; F † for the theoretical account is less than 0.05, which indicates that the theoretical account is important [ 28 ] .4.2.1.2 Multiple arrested development coefficients:To look into whether the fitted theoretical accounts really describe the experimental information, the multiple arrested dev elopment coefficient [ R2 ] is computed. R2 statistic is defined as the ratio of variableness explained by the theoretical account to the entire variableness in the existent experimental informations and is used as a step of goodness of fit [ 28 ] . If R2 attacks to integrity, the better the theoretical account fits the experimental information. In other words, it is the proportion of fluctuation in the dependant variable [ response ] that can be explained by the forecasters [ factor ] in the theoretical account. From Table 4.6, R2 for tensile strength is found to be 0.9276. This shows that the second-order theoretical account can explicate the fluctuation in tensile strength up to the extent of 92.76 % . The adjusted R2 efforts to give a more appropriate value to gauge R2. Adjusted R2 can be computed utilizing the expression 1- [ [ 1- R2 ] * [ N-1 ] / [ N-k-1 ] ] , where N is the figure of observations and K is the figure of forecasters [ 28 ] . When N is little and K is big and there will be a much greater difference between R2 and adjusted R2 [ because the ratio of [ N-1 ] / [ N-k-1 ] will be much less than 1. By contrast, when the figure of observations is really big compared to the figure of forecasters, the value of R2 and adjusted R2 will be much closer because the ratio of [ N-1 ] / [ N-k-1 ] will near 1. From Table 4.6, adjusted R2 for tensile strength is found to be 0.8915. It can be observed that the values of R2 and adjusted R2 are much closer to each other. The developed mathematical theoretical accounts are farther checked for their adequateness utilizing normal chance secret plan of remainders. The diagnostic secret plans are drawn to look into whether the informations are usually distributed and for any premise is violated. Therefore, the normal chance secret plan of remainders for the responses, tensile strength is plotted. Normal chance secret plans are used to measure whether informations come from the normal distribution. The statistical process makes the premise that an implicit in distribution is normal [ 28 ] . Thus normal chance secret plans can supply confidence that the premise is justified, or else supply a warning of jobs with the premise. An analysis of normalcy typically combines normal chance secret plans with hypothesis trials for normalcy. In a normal chance secret plan, if all the information points autumn near the line, an premise of normalcy is sensible. Otherwise, the points will swerve off from the line, and an premise of normalcy is non justified. The normal chance secret plans of the remainders for the end product responses, tensile strength is shown in Fig. 5 and it can be observed that the remainders are located on consecutive line, which means that the mistakes are distributed usually. The 3D surface graphs for tensile strength are shown in Figs. 6 – 8. All have curvilinear profile in conformity to the quadratic theoretical account fitted. Fig. 6 shows the interaction consequence of fibre length and alkali intervention clip on tensile strenth at different degrees of fibre volume per centum. It is clear from the figure that at highest values of fibre length and alkali intervention clip the tensile strenth attains largest value of 27MPa. At high value of alkali intervention clip ( 6Hrs ) and low value of fiber length ( 3mm ) , tensile strength varies from 17-19 MPa. where as at low value of both fiber length and alkali intervention clip the tensile strength is lowest. Fig. 7 depicts the consequence of fibre volume per centum and alkali intervention clip on tensile strength at different degrees of fibre length. As indicated in the secret plan the tensile strength additions with addition in both fiber volume per centum and alkali intervention clip. The highest value of tensile strength of about 27MPa is recorded at high values of fibre volume per centum and alkali intervention clip. Fig. 8 describes the interaction consequence of fibre volume per centum and fiber length on tensile strength of short and indiscriminately oriented Palmyra fiber composite at different degrees of base intervention clip. As the fibre volume per centum additions from 20 – 40 % and fibre length increasing from 7 – 3mm so tensile strength additions from 13 – 27 MPa. The combined consequence of fibre length and fibre volume per centum increases the tensile strength of composite. It can be said that the empirical theoretical accounts developed were moderately accurate, for Tensile strength.5 DecisionThe proposed work is on the survey and consequence of procedure parametric quantities on the tensile strength of short and indiscriminately oriented toddy palm fibre reinforced complexs. The experimental probe on mechanical behavior of palmyra fibre reinforced complexs leads to the undermentioned decisions: Tensile strength ( TS ) , of the toddy palm fibre reinforced compos ite stuff is greatly influenced by alkali intervention clip, fiber length and fibre volume fraction. The quadratic theoretical account developed by RSM can be used to foretell the tensile strength of the toddy palm fibre reinforced composite stuff at 93 % assurance degree. But the cogency of the theoretical account is limited to the scope of parametric quantities considered for the probe. The truth of the developed theoretical account can be improved by including more figure of parametric quantities and degrees. Further, mathematical theoretical accounts can be developed by taking multiple responses, with different scopes of procedure variables and the composite design can be optimized based on the demand of the clients.